Fossilix has a large selection of touch screen kits to meet the requirement for different kiosks:

5 wire resistive touch screens with USB controller

The 5 Wire Resistive Touch Screen is a two layer structure, 1. TO glass substrate with one side uniform resistive ITO coating. 2. A very thick polyester ITO film is tightly suspended over the top of ITO glass substrate. This ITO film has a hard, durable coating on the outer side, on an inner side with ITO coating. 3. The ITO glass and the ITO film is separated by printed small, transparent insulation spacer dots. When the screen is touched, it pushes the ITO film to have an electrical contact with ITO glass (both on the ITO coating side). It then produces a voltage which is the analog representation of the position touched. No limited to touching medium because it induces by pressure, it can be operated no matter with hand, pencil, credit card, stick...etc. that also can work even though wearing glove.

 

SAW touch glass screens for heavy duty use and vandal resistant

Normal Type Surface Wave Acoustic Touch Panel Saurface wave Technology Pure glass touch screens with superior image clarity, high resolution, good light transparence. Durable, Scratch-resistant glass surface continues to work if scrached. High touch point density: over 10000 touch points per square inch. Good stableness without drift, automatic correction, acurate operation. Long service life, over 50 million touches in one location without failure. The long touch screens warranty available. Anti-glare glass option Finger, gloved hand and soft stylus activation. CRT Flat, Spherical, Cylindrical and LCD touch screens for customers's options.

Model	Type	Dimension	Model	Type	Dimension
10" 4LCDXB	LCD	10.4"	15" 1LCDXB	LCD	15.1"
12" 1LCDXB	LCD	12.1"	17" 1LCDXB	LCD	17"
13" 3LCDXB	LCD	13.3"	18" 1LCDXB	LCD	18.1"
14" 1LCDXB	LCD	14.1"	19" CRTFXB	CRT Flat	19"
15" CRTXB	CRT Flat	15"	21" CRTFXB	CRT Flat	21"

The new type surface acoustic technology made the glass into bevel edge, and the transducers mounted at two sides to efficiently avoid the increase of the installation thickness of the touch screen.

Data:

Resolution	4096X4096
Positional	2mm
Transparency	90%~92%
Touch Sensibility	Touch force lower than 80g(adjust allowed)
Touch response	Less than 10 MSEL
Expected Life	More than 50 million touches in one location
Anti-glare surface	6:1 minimum
Gloss (Using a 60-degree)	Flat : 80+15 gloss units
Surface durability	Mohs's hardness rating of 7
Operating	-20*C~+50*C
Storage	-40*C~+70*C
Humidity	10%C~90%(40*C)
Operation Attitude	300 meter

 

IR touch screens with bezel .

1.MECHANICAL

Housing	Black Powder coated metal
Touch Size (Out line)	464(w)X365(h)X10.3(d)mm
Useful Screen Area	371.0(h)X302.1(v)
Wight	2.3Kg
Drwawing	Please refer to Appendix 1

 

2.TOUCH CHARACTERISTICS

input Method	Finger or gloved hand activation
Touch activation Force	No minimum touch activation force
Position Accuracy	Typical centroid accuracy 2mm
Resolution	4.544x3.712
Response Time	Touch : pms
	Drawing : 16.5ms
Glass	Transmission : 92% upto 100%
	Thickness : 3.2 mm with anti-vandal
Optics Number	71(h)x58(v)
Optics cell pitch	5.3mm
Available Object Sizes for Touch	Touch : 5mm
	Stylus : 5mm
Touch Intensity	Over 60,000,000 single point touch

 

3.ELECTRICAL

Operating Voltage	DC 4.6v~DC5v
Power	0.6(current)120mA at DC 5v
Connector between touch panel and controller	22pin FPC Cable

 

4.ENVIRONMENT

Temperature	Operating -20*C to 85*C
	Storage -40*C to 85*C
Humidity	perating 20% to 85%
	storage 0~95%
Relative Humidity	Operating 40*C at 90% RH, noncondensing
Light Test	Incandescent lamp (220v, 60w) , Operating distance 300mm over
Altitude Operating	3,000m
Interface	RS232(C) or USB 1.1
Detection Method	Infrared rays
Seal Ability	can be sealed to meet NEMA4 and IP65 standard
Warranty	Touch screen : 5years limited Warranty
	Controller: 5years limited Warranty
Working Place	Not working under sunlight, for indoor used application.

 

5.CONTROLLER

5.1 Interface Connector C(YEON-HO 10008HR-22L) - 22pin FPC Cable

5.2 Input Connector CN2 : Power Connector (Molex.5267-03, YEON-HO YMW023-03R)

Pin No.	Symbol	Description
1	GND	GND
2	GND	GND
3	Vin	Input Voltage : 5V

5.3 Interface Connector CN3 : Serial Connector (Molex.53015-0510, YEON-HO 20017WR-05)

Pin No.	Symbol	Description
1	RX	Receive Data
2	TX	Transmit Data
3	GND	GND
4	NC	No Connection
5	NC	No Connection

5.4 Interfacet Connector CN4 : USB B type.

 

SAW touch open frame Monitor

Normal Type Surface Wave Acoustic Touch Panel  

• Surface wave technology
• Pure glass touch screens with superior image clarity, high resolution, good light transparence.
• Durable, scratch-resistant glass surface continues to work if scratched.
• High touch point density: over 10000 touch points per square inch.
• Good stableness without drift, automatic correction, accurate operation.
• Long service life, over 50 million touches in one location without failure.
• The long touch screens warranty available.
• Anti-glare glass option.
• Finger, gloved hand and soft stylus activation.
• CRT Flat, Spherical, Cylindrical and LCD touch screens for customer’s options.

Features of SAW

1.Pure glass touch screens with superior image clarity, high resolution, good quality light transmition.
2.Durable, scratch-resistance glass surface, continues to work if scratched.
3.High touch point density: over 10000 touch points per square inch.
4.Good stableness without drift, automatic correction, accurate operation.
5.Long life expectance, over 50 million touches in one location without failure.
6.Long touch screens warranty is also available.
7.Finger, gloved hand, and soft stylus activation.
8.CRT Flat, Spherical, Cylindrical and LCD touch screens are available

Specification Technology Surface Acoustic Wave(SAW) Resolution 4096*4096 Material Pure glass Deviation of Error 2mm Light Transmission 90%～92% Response Time Less than 16ms Touch Activation Force Touch force less than 100g(adjust allowed) Durability Scratch-free; More than 50,000,000 touches in one location without failure. Surface Hardness Mohs' hardness rating of 7 Multi-Point Touch Software discrimination Response Time Less than 16ms Operating Temperature Touch Screen -20°C to +50°C Controller 0°C to +65°C Storage Temperature Touch Screen -40°C to +70°C Controller -25°C to +85°C Humidity 10%-90% RH at 40°C, non-condensing Operation Altitude 3000m Agency Approval CE, FCC

 

Touch Open Frame Monitors

Fossilix heavy duty IR touch open frame monitors are available in 17” & 19” sizes. The IR touch specifications are the same as explained under IR touch panels.